Top Secret Spy Pic

[mikesrex]

This mod gets you at least 30 more WHP than stock lol.
http://www.hi-upload.com/upload/uploaded9/transmissionpicz.jpg

[Skoodles]

KALEEN

[JustaSloWgn]

mmm itb's

[Mark]

looks good man!

[garage_fresh]

ITB's are the single best mod ever

[mikesrex]

ITB's are the single best mod ever

i was talking about the polished transmission case not the ITB's lol.

I need to go get some good polishing compound and work on it some more.

[Matticus]

BMF :vtec:

[Skoodles]

i remember i spent a while polishing my b16 case when i had it apart. it wasn't that kaleen but when i went to put it back together the reverse gear shaft didnt line up in the hole and it went to tight up a bolt and it cracked so i said fuck it put another half case on it so i had half shiny half dirty lol.

[Vanessa]

ooo pretty!

[Native]

ITB's are the single best mod ever

i cant wait til you get some so you can just nut on your own. :mynameisben:

[_Brad]

BMF

[Pushrod346]

Wire wheel + Die grinder makes aluminum happy. I did a few throttle bodies, MAF ends, and some valve covers. Works amazingly well/fast, but you sometimes end up with wires stuck in your forehead.

I bought a cloth buffing wheel with a 1/4" shank on it from Sears. It came with some jewelers rouge and works great. Chucks right up in a standard die grinder, you should try it.

[projectcivicjp]

Mike's to cheap to buy ITB's lol. MO POWWWWAAAA!!! call me when you get a chance mike. I need to talk to you about next saturday! Matt said we could borrow the trailor

[mikesrex]

Mike's to cheap to buy ITB's lol. MO POWWWWAAAA!!! call me when you get a chance mike. I need to talk to you about next saturday! Matt said we could borrow the trailor

why would I need a set of ITB's when i can use an intake manifold to make more power than ITB's?

[Matticus]

why would I need a set of ITB's when i can use an intake manifold to make more power than ITB's?

Maybe he meant he likes it IDB :rotfl:

[Missing4lugs]

wow that looks nice.

[mikesrex]

another pic of what I referred to as the "Phillip Destroyer" earlier today when on the phone with Phillip:

http://www.hi-upload.com/upload/uploaded9/crxmotorpic002.JPG

[_Brad]

itr pistons? why?

[Fordtrucktexan]

This one is on a modded Saturn SC2.... I don't even want to know how much polishing and sore elbows this took...

http://i26.photobucket.com/albums/c135/Pimped_SC2/DSCF2207Large.jpg

[mikesrex]

itr pistons? why?

because the JDM ITR rods and pistons were just laying around the shop. This is my "stock" motor to drive around on in a daily driver to get good gas mileage.

[Matticus]

because the JDM ITR rods and pistons were just laying around the shop. This is my "stock" motor to drive around on in a daily driver to get good gas mileage.

Be careful, as a tuner once told me, gas mileage is the trade off of having a fast honda. :rotfl:

[mikesrex]

Be careful, as a tuner once told me, gas mileage is the trade off of having a fast honda. :rotfl:

not when your car weighs 1800 lbs and you have a big red button when you want to have tunnel vision

[Matticus]

not when your car weighs 1800 lbs and you have a big red button when you want to have tunnel vision

:rotfl:

[projectcivicjp]

not when your car weighs 1800 lbs and you have a big red button when you want to have tunnel vision

lol no shit!