Cobb AP

[mzspeed6]

Anyone using this? Pro's ? Cons?

[xBLUECALXx]

yes get it. Best purchase I have got yet. Heard stage 2 maps are way better than stage 1. Will let you know tomorrow when I get my turboback exhaust on.

[Ryan]

I'm jealous of both your cars. I love the ms6 and wish they'd do another one.

[Franklin]

ms6's taking over! Now you guys can be partners.

[JustaSloWgn]

access tune race= game over

We will be constantly updating this thread as our Project Car Progresses, we have more products, upgrades and other services that will be coming your way here shortly. Race Roots is fully engaged into pushing the MZR to the Max!

We wanted to start off with a completely bone stock car and go from there so we did a benchmark for the car to show our abilities and truly show what we can do for the tuning platform and the mazdaspeed community.

We are now offering our tuning services to the community to get the potential out of the car the community wants and deserve with no concern of knock. Our tuning services will encompass a complete offering to the end customer with base maps, Partial Throttle Tuning, and WOT Tuning with everything in between to get the true potential of your Mazdaspeed.

Car: 2009 Mazdaspeed 3
Modifications- Cobb ATR professionally tuned by Race Roots
Gas: 93 octane

Ambient Temp measured by Dynojet
Run# 1- 100.52
Run# 3- 102.02

Humidity measured by Dynojet
22% both runs

Intake air temps:
Run 1 - 102.2f
Run 3 - 105.8f

Boost:
Run 1 ~13psi
Run 3 ~17psi tapering off to 14 psi @ 5600rpm and 10.5 @ 6756rpm


And Now the Stock Dyno!!


HORSEPOWER GRAPH:

http://i118.photobucket.com/albums/o113/BluMonstrRX8/untitled-2.jpg



RPM-----Stock Power-----Tuned Power-----Gains
4.0k--------178.6------------199.5---------20.9
4.5k--------194.7------------238.4---------43.7
5.0k--------214.7------------246.9---------32.2
5.5k--------235.8------------253-----------17.2
6.0k--------186.1------------240.5---------54.4
6.5k--------125.9------------197.1---------67.2




TORQUE GRAPH:

http://i118.photobucket.com/albums/o113/BluMonstrRX8/stockvstunedtorque-1.jpg



RPM-----Stock Torque-----Tuned Torque-----Gains
4.0k--------231.9-------------261.7----------29.8
4.5k--------227.3-------------278.2----------50.9
5.0k--------225.6-------------259.3----------33.7
5.5k--------225.2-------------241.6----------16.4
6.0k--------162.9-------------210.5----------47.6
6.5k--------101.7-------------159.3----------57.6

Graphs Together:

http://i118.photobucket.com/albums/o113/BluMonstrRX8/stockvstunedoverlay.jpg


More to come within the coming weeks with new products, more Dyno's, options full of win and no more "Mazdaspeed Fail"

[Franklin]

oh snap AP late night tuning sessions on HWY 69 inc.

[xBLUECALXx]

Just put on the turboback exhaust and stage 2 map. Get the AP and don't even think twice about it.

[mzspeed6]

hahaha....well ya'll know about SU car? GT40 and tuner from cobb helped with the build...I can't find any more info about it except for the show that they have in florida. I wish we were closer....or baller and have cash to blow to go to florida with our cars...wait bluecal, don't u have connections with a transport airplane? maybe we can pull a gumball3000 and fly our cars to florida....ahhh a guy can only dream....



ohhh..I saw something on utube about cobb ap having launch control... does the cobb ap have that capability?

[mzspeed6]

access tune race= game over


Woah...I like those top end gains... no boost leak I hope. Are u running cobb ap? I don't know your mods... my list of mods "to do" as follows: test pipe ( can't have it too loud..don't want Brianna crying) cp-e FMIC, cobb ap & catch can. I wanna keep the stock turbo...u know how these list goes...sooner or later I'm gonna end up getting a turbo back exhaust and upgrade to gt28... hahaha

[JustaSloWgn]

nope no ap yet, planning on going to meet with secret services see if they can tune the speed 3, if i get ap.
stock turbos are good for 300 or so hp just wont make power to redline like a superstockturbo

engine mods are
vibrant 3" ..replaces 2nd cat with highflo
cpe nano
ets 3.5" tmic
cobb inlet tube
forge bpv
balance shaft delete and ptp windage tray. .. increase your oil capacity by 1qt, takes a gaint load off that 3 cyclinder , better oil control.

look at that gain at 6k 54hp xD ull be able to shift at 6 instead of 5.5

[xBLUECALXx]

Yeah they are making launch control features on their maps. They haven't submitted any on their website so I think the only way to get it is to download ATR, and tune with it yourself or have someone else. I personally wouldn't use it cuz I heard with awd you don't want to just dump the clutch and have WOT its bad for the awd system.

[JustaSloWgn]

they fixed the lc and ffs bugs

[mzspeed6]

nope no ap yet, planning on going to meet with secret services see if they can tune the speed 3, if i get ap.
stock turbos are good for 300 or so hp just wont make power to redline like a superstockturbo

engine mods are
vibrant 3" ..replaces 2nd cat with highflo
cpe nano
ets 3.5" tmic
cobb inlet tube
forge bpv
balance shaft delete and ptp windage tray. .. increase your oil capacity by 1qt, takes a gaint load off that 3 cyclinder , better oil control.

look at that gain at 6k 54hp xD ull be able to shift at 6 instead of 5.5


with the ap, the problem of the throttle boody closing to 70 degress above 5.5k will be solved. so our cars won't fall flat on it's face after 5.5k.

[mzspeed6]

they fixed the lc and ffs bugs


enlighten me on the meaning of ffs?

[mzspeed6]

I'm jealous of both your cars. I love the ms6 and wish they'd do another one.

Don't count your egss yet... we don't know what 2011 will bring us... think sho's engine in the new mazdaspeed6...that's the rumor anyways....