View Full Version : NBPacuraTL you have a package lol
pooprajoe
05-07-2009, 11:28 PM
I've been waiting for this day.... and it has arrived... to regain my statues.....
http://i157.photobucket.com/albums/t45/evi1eclipse/package.jpg
can't wait till day light.
NBPacuraTL
05-07-2009, 11:47 PM
atleast you spelled my name right this time lol. Alright, but I was having fun being moderator :(
shftyazn
05-07-2009, 11:47 PM
I've been waiting for this day.... and it has arrived... to regain my statues.....
status or statues?! :thinker:
did phu take some statues again?!?!?
:rotfl:
NBPacuraTL
05-07-2009, 11:50 PM
status or statues?! :thinker:
did phu take some statues again?!?!?
:rotfl:
Yea, I stole his garden gnome. So when is this going to happen?
pooprajoe
05-08-2009, 01:10 AM
give me back my lawn gnomes, I meant status... oh buddy it will happen soon very soon, maybe khols tomorrow never know.
NBPacuraTL
05-08-2009, 06:58 AM
Aw come on.... I want to wait til I get my camera mount... So eagered. How about next week on Saturday since next Friday is my prom?
_Brad
05-08-2009, 08:19 AM
?
PocaFocus
05-08-2009, 09:40 AM
hahaha
killa_D
05-08-2009, 10:07 AM
yeah im with you on that one brad
pooprajoe
05-08-2009, 11:44 AM
lets just say it's the rebirth of the poopra, only have about 2-3 more bolts to get to and the process will begin.
pooprajoe
05-08-2009, 07:52 PM
finally took all day long but 25% done, trust me thats was the hard part rest should be easy. i just hope when im done i'm as fast as a sohc honda. but prolly not :(
Twinky
05-08-2009, 09:36 PM
man everyone in this thread is FOB
PocaFocus
05-09-2009, 12:17 AM
oh gawd. here we go again...Does Wytchdctr need to bring out the mazda van?
NBPacuraTL
05-09-2009, 12:26 AM
I might move this to Force Induction section if I know what's in the box and since this is turning into a small progress thread for Phillip
pooprajoe
05-09-2009, 12:43 AM
oh gawd. here we go again...Does Wytchdctr need to bring out the mazda van?
so much negativity, I will fuck that van up side ways. I've come a long ways from a fucked up talon, and this supra even with a dieing turbo would smash that van.
NBPacuraTL
05-09-2009, 01:14 AM
So new turbo right Phillip?
Wytchdctr
05-09-2009, 01:15 AM
:rotfl: Zoom Zooom motha fucka! Na, not going to let you beat me buy a headlight and claim an asswoopin again. This time your getting the crooked H, with it's new ignition coils, oh hellz yeah. Your going down fool!
Supra:: :pray: "please don't let me get stomped by a hyundai"
evo2sti
05-09-2009, 10:48 AM
So new turbo right Phillip?
na just a semi rebuild.
pooprajoe
05-09-2009, 11:28 AM
na just a semi rebuild.
which hopefully will be installed this after noon, man do i have alot of shit to take care of today so I'm not 100% sure.
NBPacuraTL
05-09-2009, 11:56 AM
Get pictures up. I'm going to send this to the forced induction section. Whenever it's up and running, make a call out thread in S.E. or PM me.
pooprajoe
05-11-2009, 10:24 AM
so I am almost done just need to push this one piece in all the way (having a problem) and install a snap ring then it's ready to be bolted back in, didn't do a full write up, but I found what caused the failure and have a few pics
pooprajoe
05-11-2009, 02:48 PM
okay boys and girls after fighting with the last few parts, it is done, and the game is about to be on, no more shaft play all I have left is to install it and run it for a little bit. hopefully friday/saturday I'll have enough miles on it to actually boost happily.
NBPacuraTL
05-11-2009, 03:21 PM
Pics? if any? and I should be ready saturday
pooprajoe
05-15-2009, 10:40 PM
so everything was put together, and slapped the turbo in..... and just my fucking luck no boost car smoking wayyy worse plus a clanking noise....my heart drops.. (turbo hitting the housing)... so I immediately turn the car off get my tools and rip into the turbo like a mad man literally took me maybe 7 minutes to pull the compressor housing off. I run up stairs and put it on the table ready to inspect the fins, to my surprise not even a scratch??????????????? try to spin it nothing, grab my wrench to try and spin it, nothing. loosen the bolts a tad and spins nicely, clanking noise was this bowl thingy that was lose. OMG DODGE A HUGE FUCKING BULLET. so it will go back in tomorrow after work.
pooprajoe
05-19-2009, 10:04 PM
MOTHERFUCKING BULL SHIT. so little up date, slapped it on the other day and was ready to go boosting, bolted it in slapped intercooler piping the oil return line on, check, then last fucking mother fucking bolt was the oil feed line, so I tighten it up and the last turn lining it up, snap, WTF, the mother fucking oil feed line bolt snapped, in half, looked everywhere for a replacement, but ended up having to order one fucking bolt. (15 bucks) takes a fucking week to get.
NBPacuraTL
05-19-2009, 10:46 PM
By the time we actually race, I'll probably have another car
jbby4prez
05-19-2009, 11:25 PM
By the time we actually race, I'll probably have another car
lol sounds like it :rotfl::rotfl::rotfl::rotfl:
pooprajoe
05-20-2009, 04:21 PM
By the time we actually race, I'll probably have another car
I already ordered it, should be here asap.
pooprajoe
05-20-2009, 04:24 PM
lol sounds like it :rotfl::rotfl::rotfl::rotfl:
didn't I bust your ass???????
NBPacuraTL
05-20-2009, 04:26 PM
Good. I want you to run BJ first please. I'm trying to keep my car babied for a bit with all the racing I've done.
Any pictures of your progress or replacement?
pooprajoe
05-20-2009, 04:34 PM
dog chewed up my camera cable, (dam that sounded like I was posting a for sale on hi.com, but it's the truth).
pooprajoe
05-28-2009, 12:14 AM
okay so plans were to get the new banjo bolt and get the supra up for a run this weekend....well I get the box rip it open and mother fucker wrong fucking size this thing is twice the size of oem, not sure what happened with the order but have to call the place I ordered and get the correct size which will prob take another mother fucking week or two.
NBPacuraTL
05-28-2009, 12:29 AM
:rotfl:
I hate to be you dude.
_Brad
05-28-2009, 08:40 AM
HA HA. get a normal fucking bolt and drill it out and make it a banjo bolt. takes like 10 minutes and a trip to the hardware store. dont worry fillup we arnt expecting much from this build =]
pooprajoe
05-28-2009, 07:33 PM
HA HA. get a normal fucking bolt and drill it out and make it a banjo bolt. takes like 10 minutes and a trip to the hardware store. dont worry fillup we arnt expecting much from this build =]
long story brad about doing something like that anyways i just ordered a new one ane sending the old one back and getting a refund. anyways brad seeing how my car has been on the street in the past 2 years you dont have alot of room to talk. hell even with all this my car will be up before yours.
alchemist117
06-08-2009, 10:10 PM
well when its done ima call u out lol mkay
Andrew
06-08-2009, 11:15 PM
Brad had the other 240 which is no longer with us..:pray: Bless that golden turd.
Vanessa
06-09-2009, 08:05 PM
yard knomes ftw............. oh and flamingos too
pooprajoe
06-09-2009, 09:55 PM
yard knomes ftw............. oh and flamingos too
wth?????? you okay there..
anyways an update got everything in and still 0 boost working at finding the culprit I'm thinking it's a crack in the exhaust housing on the turbo, I've been working so dam much lately and then they switched my schedule so I'm not sure when I'll have free time to work on it anymore.
vBulletin® v3.7.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.