Matticus
04-20-2008, 04:39 PM
This came off of a rsx type s. If you have an ep3 or another chassis (I.E. eg, ek, em1 etc.) with kseries there may have to be some mod's done to the i/c pipe. But, I am sure it wouldn't be anything too bad.
Includes:
Rev Hard Cast Iron Manifold
Rev Hard T3T4 Turbo (sc 34) (turbo has a blanket and I will also throw in a heat shield that I used with it)
Rev Hard Intercooler (28x6.5x3)
Tial Wastegate 38mm(7 psi spring)
Vortec Blow-Off Valve
2.25" Piping on the hot side, 2.5 on the cold side
2.5" Downpipe (heat wrapped/ 2 o2 bungs 1 for kpro primary and one for a stand alone wideband, also has flex pipe)
Silicone Hoses and T-bolt Clamps
Steel Braided -3 Oil line and Oil Return Line
Gaskets for EVERYTHING lol
Intake pipe with fairly new filter
GM 3bar map
Turbo xs mbc
http://i18.tinypic.com/4gjdlia.jpg
http://i24.tinypic.com/14y0e50.jpg
http://i20.tinypic.com/bgpyes.jpg
http://i32.tinypic.com/ws8ncx.jpg
http://i29.tinypic.com/156z5n4.jpg
The turbo has absolutely NO shaft play, as its nearly new. I would recommend this kit to anyone wanting around 350whp on a type s and around 300whp on a base or ep3.
2200 shipped
I put down 406whp and 339tq with this set-up. k24/k20 frank (everything was stock)
Reason for selling: I now have a built 2.4, gt40 and a sidewinder manifold. I have no use for a 400whp kit.
Also for sale:
Stainless Braided PS line - $100 w/ trade of your stock rsx ps line
BDL throttle body spacer (type s tb and i/m with boost ports) - 40 bux
I am willing to knock some off the price for a rbc i/m with a karcepts adapter for type s throttle body WITH boost ports :)
Includes:
Rev Hard Cast Iron Manifold
Rev Hard T3T4 Turbo (sc 34) (turbo has a blanket and I will also throw in a heat shield that I used with it)
Rev Hard Intercooler (28x6.5x3)
Tial Wastegate 38mm(7 psi spring)
Vortec Blow-Off Valve
2.25" Piping on the hot side, 2.5 on the cold side
2.5" Downpipe (heat wrapped/ 2 o2 bungs 1 for kpro primary and one for a stand alone wideband, also has flex pipe)
Silicone Hoses and T-bolt Clamps
Steel Braided -3 Oil line and Oil Return Line
Gaskets for EVERYTHING lol
Intake pipe with fairly new filter
GM 3bar map
Turbo xs mbc
http://i18.tinypic.com/4gjdlia.jpg
http://i24.tinypic.com/14y0e50.jpg
http://i20.tinypic.com/bgpyes.jpg
http://i32.tinypic.com/ws8ncx.jpg
http://i29.tinypic.com/156z5n4.jpg
The turbo has absolutely NO shaft play, as its nearly new. I would recommend this kit to anyone wanting around 350whp on a type s and around 300whp on a base or ep3.
2200 shipped
I put down 406whp and 339tq with this set-up. k24/k20 frank (everything was stock)
Reason for selling: I now have a built 2.4, gt40 and a sidewinder manifold. I have no use for a 400whp kit.
Also for sale:
Stainless Braided PS line - $100 w/ trade of your stock rsx ps line
BDL throttle body spacer (type s tb and i/m with boost ports) - 40 bux
I am willing to knock some off the price for a rbc i/m with a karcepts adapter for type s throttle body WITH boost ports :)